PORTABLE EXCIMER LASER 308NM UV PHOTOTHERAPY KN-5000C
The Excimer range is the Rolls Royce of new technology Phototherapy
Indications: Psoriasis, Vitiligo, Dermatitis,
Eczema, Pityriasis Rosea
Certification: CE
Light
Source: XeCI
Excimer light
Technical
Specifications |
Main
Technical Parameters |
Production
Introduction |
308
Excimer Targeted Phototherapy system is a new kind of phototherapy treatment
instrument, it can erupt high energy ultraviolet rays. Compared to
traditional phototherapy, its treatment accuracy and targeting sharply
shortens treatment circle and treatment times. It has the effect to cure the
disease within a short period of time. |
Operation
Mode |
Continuously
Operation |
Power
Supply |
AC220V±10%
50Hz±2% (output:AC100-240V, 50/60Hz) |
Rated
Power |
160VA |
Display
Mode |
8"
color touch screen |
Output
Waveform |
XeCl
excimer light |
Irradiation
Area |
20cm2±1cm2 |
Lift
time of light source |
≥500
hours |
Irradiation
intensity |
45
mW/cm2 |
Time
setting range |
120S |
Laser therapy for psoriasis
vitiligo psoriasis eczema treatment
Kernel KN-5000C 308nm excimer laser 308nm
targeted therapy for vitiligo psoriasis
2020 new trending product physiotherapy
equipment excimer laser 308nm excimer laser for vitiligo psoriasis
1.Promotes melanin synthesis and promotes
melanogenesis.
2.Promotes T cell death (Note: autoimmune
defects, T cell attackers destroy melanin-producing skin cells, causing loss of
melanin in the skin)
3.Promotes the production of vitamin D3.
4.Activate pseudo-catalase.
·
Small size, low cost of consumables.
·
Quick start, one key output, easy to operate.
·
8"touch screen combined with humanized GUI design, built-in
minimum erythema dose (MED) test function.
·
Treatment handle works with multi-specification-available shading
sheet, realized a precise control of the irradiation range, suitable for different sizes of lesion treatment.
·
Good targeting, no harmless to normal skin, easy to treat the
lesions where the traditional light hard to reach
·
Dose and time two kinds of work mode, one machine
for multiple use.
Excimer
laser is a laser produced when molecules of an inert gas excited by an electron
beam and a mixture of halogen gases combine to form molecules to jump into
their ground state. Excimer laser is a cold laser without thermal effect. It is
a pulse laser with strong directivity, high wavelength purity and large output
power. The wavelength range of photon energy is 157-353 nm, and the life span
is dozens of nanoseconds. The most common wavelengths are 157 nm, 193 nm, 248
nm, 308 nm, 351-353 nm
Why 308nm is
better?
Clinically
used 308 phototherapy has two characteristics compared to other phototherapy
methods:
1. Strong targeting, High energy, great curative effect, quick effect, and short
course of treatment. Energy is reflected by the intensity of the radiation
(also known as light intensity, optical power, spot density).45mW/cm2.
2. Xecl as midum so as to emit 308nm Single wavelength. Avoid other
harmful wavelength interference.
3.Only
several seconds for each lesion part. Initial time 3-5 seconds, for face and
trunk,2-3times start to work,8-15 will be cured.
4.Suitable
for children and pregnant women, safe and no side effects from international
clinical application data.
Higher output intensity, Quick therapeutic
effects
The irradiation
intensity is up to 45mW/cm2, and the irradiation time is calculated in seconds,
which is faster and more effective.
Accurate targeted therapy without damaging normal skin health
The side wall of the
light exit port is made of transparent radiation-proof material,
and combined
with a multi-shaped filter screen window to accurately treat under direct
vision without damaging healthy skin.
Excimer Laser Phototherapy Lamp KN-5000C Portable
- Product Code: Excimer KN-5000C
- Availability: In Stock
-
$5,120.00
Tags: UVA, light, UVB Excimer Laser